Serious question.

        • IphtashuFitz@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          2 days ago

          I do lighting design in small theaters & have a fair amount of my own gear. I have a ton of 3-pin, 4-pin, and 5-pin XLR cables, and also some adapters that convert between 3&5 pin. I use colored zip ties on the ends of each cable to not only tell me what type of cable it is but to distinguish my cables from the theaters cables.

          • corsicanguppy@lemmy.ca
            link
            fedilink
            English
            arrow-up
            2
            ·
            edit-2
            2 days ago

            I’ve worked in some big data centers. The network wiring, thank god, is labeled on each end with a unique number. They come from the supplier like that, and are tracked for decom just like anything else.

            Otherwise, 20cm diameter bundles, yeah.

  • A_norny_mousse@feddit.org
    link
    fedilink
    arrow-up
    33
    ·
    edit-2
    2 days ago

    That’s nothing!

    thailand cable salad

    Sorry for the stock imagery; I’ve seen even more extreme salad but can’t find it now.

    • Ebby@lemmy.ssba.com
      link
      fedilink
      arrow-up
      22
      ·
      2 days ago

      Fun fact: A skilled linesman can use their tongue to tell the difference between 9V DC and 115kV AC.

      The more you know*

      • jubilationtcornpone@sh.itjust.works
        link
        fedilink
        arrow-up
        12
        ·
        2 days ago

        You can tell it’s 14.4kV by the linemans muscle spasms and sudden loss of consciousness. If he bursts into flames or is immediately vaporized, that’s the 115kV.

        Although, the way you can tell if the lineman really knows what he’s doing is if he gets someone from the right-of-way crew to do the tongue test for him.

      • Midnight Wolf@lemmy.world
        link
        fedilink
        English
        arrow-up
        4
        ·
        2 days ago

        A great tip for those who need a little cooling off after the end of a hot day; who would have thought to include AC with power lines! What will they think of next?

  • teft@lemmy.world
    link
    fedilink
    arrow-up
    41
    ·
    edit-2
    2 days ago

    Fluke makes a bunch of tone generators and circuit finders that you can use to figure out which line you need to work on. I assume linesmen have something similar for their more robust needs.

    • bobs_monkey@lemm.ee
      link
      fedilink
      arrow-up
      20
      ·
      edit-2
      2 days ago

      Power linemen have phasing sticks to determine which phase is which.

      Datacom wires are, to start, much lower on the pole than power cables, and have markings on the cable jacket to determine what the cable actually is (fiber, coax, tel, etc). Beyond that, there is usually some tagging at each service point.

  • hera@feddit.uk
    link
    fedilink
    English
    arrow-up
    22
    ·
    2 days ago

    When we had our broadband installed the guy doing it took way too long and got very frustrated and made a mess of it, but it worked. Two days later it stopped working.

    When the fault engineer came and fixed it, turned out the original engineer had connected us to the wrong cable, so when another engineer came to set up our neighbour’s Internet, they disconnected ours.

  • vinnymac@lemmy.world
    link
    fedilink
    arrow-up
    6
    ·
    2 days ago

    If you think this is bad you should visit Mexico City. I don’t know who has the worst wiring in the world, but it’s like your photo, except 10x more tangled and everywhere you look you will find wires literally dangling in front of you while you walk down a street or cross walk. Who knows which ones are live.

  • huppakee@lemm.ee
    link
    fedilink
    arrow-up
    3
    ·
    2 days ago

    You can embed an image by writing ![optional alt text](img url), make sure the url actually leads to the image and end with something like .jpg .png or .webp