I’m new to this, and having a lot of fun.

I started with the Blackview MP80 running Ubuntu(Minecraft server on docker and Home Assistant in a VM)

Then I bought the BMAX for 82€ and moved HA on to it so I can wipe the MP80 and play around with Proxmox and Nextcloud erc without breaking my home automations.

Yesterday I got the Hardkernel H4+ with 16gb ram and 2x 6TB 2nd hand commercial grade HDD’s (testing them now, 3 month guarantee)

Looking forward to setting up ZFS pools for the first time, ans probably move my Nextcloud AIO over to the TrueNAS app

  • Thorry84@feddit.nlEnglish
    27·
    10 hours ago

    Just so you know, operating spinning drives this way is a bad idea. If the platters are spinning and the drive tips over, the rotation of the drives resists the movement. This gyroscopic force is enough for the platters to touch the heads which are flying a tiny distance above the platter. Obviously this is a bad thing and will damage the drives.

    A quick fix is to just lay them flat or fix both of them together so they have a more stable base to stand on. Putting it in an enclosure is even better.

    • Diplomjodler@lemmy.worldEnglish
      92·
      9 hours ago

      You gotta embrace the jank! Also, he’s got them in some kind of stand. That looks reasonably stable to me.

      • Ek-Hou-Van-Braai@piefed.socialOPEnglish
        61·
        8 hours ago

        I love my janky temporarily solution.

        I made a stand of old ikea plastic parts I had laying around, screwed them together and have both drives supported from both sides and connected together.

        If I directly bump the drive hard enough they’d fall, but I’m pretty confident I can shake the table really hard and they’ll be fine.

        I’m hoping to get a 3D printer to make a more permanent solution

        • GetAwayWithThis@lemmy.dbzer0.comEnglish
          6·
          8 hours ago

          Thanks for the feedback! I am doing the opposite right now funnily enough. Trying to move away from having everything on Truenas as an app because of the host-app communication limitations. I have a bridge network set up but it still has its issues.

          I’ll need to get some hardware to make this happen. At least to have a PCIe SATA controller I can pass through to a TrueNas VM so I can have everything on one physical host.

          Nextcloud is on the list to try. For now syncthing was fixed up for filesync from my shoddy implementation of it yeras ago.

          • dieTasse@feddit.orgEnglish
            1·
            2 hours ago

            I have recently moved adguard and home assistant to raspberry pi, same reason, though the hass I have moved into docker container with host network in the end. I also installed tailscale directly to have easy setup as an exit node.

          • Ek-Hou-Van-Braai@piefed.socialOPEnglish
            1·
            8 hours ago

            lol I won’t those HDD’s are like my babies, I’m very careful with them, that temporary stand while not foolproof is solid, but I have no plans of testing it out now that the drives are in there

    • Ek-Hou-Van-Braai@piefed.socialOPEnglish
      3·
      8 hours ago

      Thanks this is a very temporary solution until I can 3D print a better solution or buy an better temporary solution.

      It’s pretty stable I have a make shift stand, and I’d have to bump them pretty hard for them to fall over. If I shake the table hard they definitely won’t fall